Bộ xác định điểm lỗi cáp Sonel LZK -710
Detection of wires (live or using external power source):
- detection of wires in ceilings, walls and floors,
- locating power points and switches in buildings,
- locating short circuits between leads (using external power source),
- tracing wires in metal ducts.
Identification of fuses on the distribution board.
Tracing conductive water and heating pipelines (using external power
source).
Non-contact detection of live wires.
Signalling of transmitter and receiver opeartion by LED and sound.
- indication of signal level on dotted light line.
Features:
- operation in wide range of rated voltage, 12V DC (24V AC)...250V,
- two modes of transmitter amplification,
- adjustment of receiver sensitivity level,
- modes of wire tracer operation - current (detection of magnetic field),
- transmitter powered from tested installation.
Electric security:
- type of insulation double, according to EN 61010-1
- measurement category CAT III 300V acc. to EN 61010-1
- transmitter’s protection class acc. to EN 60529 IP40
- receiver’s protection class acc. to EN 60529 IP40
Other technical data:Bộ xác định điểm lỗi cáp Sonel LZK -710
- transmitter’s power supply external source AC min. 24V or DC min. 12V
- transmitter’s max working voltage 250Vrms (353Vampl)
- transmitter’s dimensions 128 x 66 x 28 mm
- transmitter’s weight approx. 300 g
- detector’s max range 60cm
- non-contact neon max range 20cm (in air), 3cm (in concrete)
- receiver’s power supply battery 9V 6LR61 alkaline
- receiver’s dimensions 210 x 82 x 24 mm
- receiver’s weight approx. 200 g
Rated operational conditions:
- operating temperature -20...+50°C
(
