Bộ xác định điểm lỗi cáp Sonel LZK -700

Detection of wires and cables (live or not):

- detection of cables in ceilings, walls and floors,

- detection of breaks in cables,

- tracing cables in building installation,

- locating power points and switches in buildings,

- locating short circuits between leads,

- tracing shielded cables,

- tracing cables in metal ducts.

Identification of fuses on the distribution board.

Tracing underground cables.

Tracing conductive water and heating pipelines.

Non-contact detection of live cables.

Bộ xác định điểm lỗi cáp Sonel LZK -700

- signaling of  transmitter and  receiver opeartion by LED and sound,

- operation in wide range of rated voltage, up to 500V RMS,

- three modes of transmitter amplification,

- automatic or manual selection of transmitter operation modes,

- adjustment of receiver sensitivity level (ZOOM function),

- four  modes  of  wire  tracer  operation  -  voltage,  current,  current-voltage

and "power",

- transmitter's battery charging - high efficiency and low costs.

Electric security:

- type of insulation double, according to  EN 61010-1

- measurement category  CAT III 600V acc. to EN 61010-1

- transmitter’s protection class acc. to EN 60529 IP40

- receiver’s protection class acc. to EN 60529 IP40

Other technical data:

- transmitter’s power supply  battery pack SONEL/Ni-MH 9,6V 2Ah

- transmitter’s max working voltage 500Vrms (707Vampl)

- transmitter’s dimensions  230 x 67 x 36 mm

- transmitter’s weight approx. 490 g

- battery charging temperature 0...+40°C

- detector’s max range („M” mode) 2m

- non-contact neon max range 20cm (in air), 3cm (in concrete)

- receiver’s power supply  battery 9V 6LR61 alkaline

- receiver’s dimensions 210 x 82 x 24 mm

- receiver’s weight approx. 200 g

Rated operational conditions:

- operating temperature -20...+50°C